17″ Pressed Steel Wool Floor Pads (#0000 – #3 Grades) – Case of 12
$57.89
Product Description
These 17 inch flat or “pressed” steel wool pads are extremely good for rough and uneven floors. When compared with our , which are extremely fluffy and thick, these pads are much more aggressive and have more surface area that is always touching and scrubbing the floor. They may bind up more, but will be more efficient in extremely tough areas. They will resist tearing, fraying, and will have less of a tendency to roll up when compared with a jumbo pad.
Each pad is actually created with a needle-punched construction style, when gives you the pressed or flattened style. You can use these types of pads to strip and/or buff depending on the grade ofpad selected. Please see the table below for specific applications for each grade.
For different sizes, please take a look at our full line of .
Comparison Chart
| Grade | Sand Paper Equivalent | Use |
| #0000 (Finest) | 300 – 600 grit | For buffing and cleaning. Buffs wood, shellac, lacquer, and varnish with wax or oil. |
| #000 (Extra-Fine) | 280 – 320 grit | For buffing, polishing, and removing. Buffs new wax finishes and polishes stainless steel. Removes paint drips and splatters, as well as minor burns from wood and leather. |
| #00 (Fine) | 150 – 220 grit | For buffing, cleaning, cutting, and removing. Buffs final finish on painted trim. Removes old finishes with finish remover. |
| #0 (Medium-Fine) | 100 – 150 grit | For cleaning and removing. Good for use on marble floors. Removes rust from metal surfaces. |
| #1 (Medium) | 80 – 120 grit | For cleaning and preparing. Good for use on granite flooring. Cleans linoleum, rubber asphalt, and other resilient floors. Prepares wood for the first coat of paint and smooths raised grain. |
| #2 (Medium-Coarse) | 60 – 80 grit | For cleaning and removing. Good for use on VCT floors. Cleans glass or stone surfaces. Removes scuff marks and old wax from floors. |
| #3 (Coarse) | 40 – 60 grit | For removing. Removes old paint and varnish. |
Quick Overview
- 12 steel wool pads per case
- For use w/ 175 rpm floor buffers
- #0000 & #000 grades require orders in multiples of 10 cases
- All other grades sold by the case
Be the first to review “17″ Pressed Steel Wool Floor Pads (#0000 – #3 Grades) – Case of 12”
Related products
Parts & Accessories
Brushes For Self-Contained Extractors
Cylindrical Brush Assembly (#010057A) for the Trusted Clean ‘Pro-7’ Self-Contained Carpet Extractor
Carpet Extractor Parts
1/4″ Male Brass Quick Connect Fitting w/ Female Pipe Thread for Carpet Extractor Tools & Hoses
Floor Pads, Bonnets & Sanding Screens
14″ x 20″ Floor Sanding Screens for Oscillating Floor Machines (60 – 150 Grit) – Case of 10
Carpet Extractor Hoses, Tools & Accessories
Mytee® 12″ S-Bend Carpet Extractor Drag Wand (0 – 1,200 PSI) – 2 Jets
Auto Scrubber Parts
Parts & Accessories
Components
Malish Tru-Fit® Universal Clutch Plate (#NP-9200) for Floor Buffer Brushes & Pad Drivers
Components
Floor Pads, Bonnets & Sanding Screens
Floor Machine Parts
Auto Scrubber Accessories
18″ Pad Driver (#9040017) for the Trusted Clean ‘Dura 18HD’ Floor Scrubber
Floor Machine Parts
3450 RPM Drive Motor (#SQU-SS-142006) for Square Scrub® 14″ x 20″ Oscillating Floor Machines
Auto Scrubber Parts
Recovery Tank Lid Gasket (#VF90504) for Trusted Clean Dura 17 Floor Scrubber
Floor Pads, Bonnets & Sanding Screens
Black Diamond Concrete & Natural Stone Floor Prep Pads Started Pack (17″ or 20″ Round) – Case of 4
Carpet Extractor Parts
5.7″ 2-Stage Vacuum Motor for Trusted Clean Carpet Extractors
Reviews
There are no reviews yet.