CleanFreak® 120 PSI Heated Carpet Extractor w/ 12″ Wand & 25′ Hose

Product Description

This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. Thehas a #02 spray jet, and also has an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. The wand does breakdown into 2 pieces via a button lock that snaps the two pieces into place for use. The solution line has a 1/8″ quick disconnect fitting on it, so the wand does truly come fully apart into two separate pieces.

Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you’ll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you’re on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you’re good to start extracting. If not, you’ll need to search for another outlet.

This machine is the big brother to thenon-heated carpet cleaning extractor, and the little brother to theheated carpet extractor. These, plus many more can be found in ourdepartment. If you’re looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our .

To make sure you’re 100% ready for the task at hand, we recommend you looking through our , , anddepartments to make sure you are properly prepared.

*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.

Features

• Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
• 12″ adjustable glide drag wand recovers 30% more solution than standard wands.
• 2 power cords (black – vacs & pump
  yellow – heaters) allows you to only run the vac motors & pump if needed.
• Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
• Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
• Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.
• Comes backed from a USA company with a 1 year warranty the motors & parts, and 90 days on labor.

Caring for Your Carpet Extractor

Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.

Quick Overview

• 120 PSI pump, 150″ of water lift
• 12″ single-jet drag wand & 25′ vac hose / solution line combo
• 11 gallon solution / 13 gallon recovery
• Heats water to 210° F