Nyco® ‘E-Z 20:1’ Concentrated Floor Stripper (32 oz Bottles) – Case of 6

Product Description

E-Z 20:1 is a super concentrated stripping solution that offers maximum speed and effectiveness when stripping floors. Removes all types of water-based finishes and sealers used on resilient tile, terrazzo, brick, quarry tile, and stone flooring. Powerful penetrating agents cut through and emulsify heavy buildups and remove multiple coats of finish on the first pass. Ideal to use on floors that have been repeatedly high speed buffed and propane burnished. No ammonia odor. Not caustic.

Caution: Due to the power of this floor stripper and seal remover, it is recommended that E-Z 20:1 not be used for purposes other than stripping. It may damage painted walls, woodwork and some older floor tiles.Test floor tiles to be sure color bleeding and damage does not occur. Not intended or recommended for use on linoleum, rubberized floors or older tiles containing asphalt.

For other options, please feel free to take a look at our full line of .

Please Note: These chemicals are not available for purchase in CA. For inquires on purchase, please contact .

Features

• Super concentrated – ultra high active ingredients.
• Convenient 1 quart packaging makes 5.25 gallons of stripper.
• Powerful – removes multiple layers and buildups of finishes, sealers & burnished coatings.
• Fast & effective helping to speed up the stripping process.

Directions

Read the entire label and SDS for proper use, handling and storage before using this product.

Test for colorfastness using diluted solution in an inconspicuous area. Wear appropriate PPE. Dilute solution with any temperature of water. Recommended dilution ratio of stripper to water: 1:20 (1 quart bottle in 5 gallons of water). For extreme buildups, increase strength of solution.

1. Liberally apply diluted solution to floor. Do not allow floor to dry. Reapply stripping solution as needed to keep floor wet.
2. Allow solution to remain on floor until the finish has become loosened and can be removed from floor.
3. Scrub floor with machine and pick up residue from floor. Do not allow loosened material to dry on floor.
4. Rinse floor prior to recoating. Use of a neutralizing solution in the final rinse will ensure better bonding and performance of future floor coatings.
5. Reapply floor seal and/or finish in a normal manner.

Quick Overview

• 6 Quarts per Case
• pH: 11.0 – 12.5
• Scent: Solvent
• Concentrate: 1 quart makes 5.25 gallons of useable stripper